Vacuum Excavation and Potholing

Avoid utility strikes.

One of the dangers with underground excavation is the possibility for a utility strike. With the use of a vacuum excavator, utilities can be located safely without fear of damage or disruption. This process uses a pressurized water jet to loosen the earth and a heavy industrial vacuum to remove the material. Excavation can also be completed underneath asphalt or concrete slabs. This process used in conjunction with ground penetrating radar can ensure a safe working site.

  • Increase the accuracy of subsurface utility engineering
  • Verify other utility locating services with a true visual inspection
  • Reduce construction and operation interruptions
  • Ensure accurate location and size of utility
  • Other Uses of Vacuum Excavation:
  • Cleaning out valve boxes or transition sumps
  • Building area wells
  • Cooling tower sumps

Featured Story

VACUUM_EXCAVATOR.jpg

Vacuum Excavator Was Instrumental In Guardrail Installation

One of the dangers with underground excavation is the possibility for a utility strike. With the use of a Vacuum Excavator, utilities can be located safely without fear of damage or disruption. The process uses a pressurized water jet to loosen the earth and a heavy industrial vacuum to remove the material.

If concerns about buried utilities where an auger or excavation is a problem and hand digging is your only alternative, contact ABC Concrete Cutting, Inc. in Pompano Beach and ask us how Vacuum Excavation can solve your problem!

Replaces_Drill_Bit.jpg

Vacuum Excavator Replaces Drill Bit

The augering of holes with an auger bit attached to a drill is the more common method of creating postholes. This process was not possible in this application because of the existence of geogrid or metal mesh approximately 24" below the ground surface. An augering bit would become entangled in the mesh either getting the bit "stuck", damaging the equipment, or both. To avoid augering problems, it was decided that Vacuum Excavation was the best method to accomplish the job. With Vacuum Excavation, soil can be removed and collected at the same time in a controlled environment. In addition, if there exists the possibility of buried utilities in the jobsite area, these utilities would not be cut or damaged as is often possible with powerful augers or excavating equipment.

Other possibilities include:

  • Clean out valve boxes or transition sumps
  • Building area wells
  • Cooling tower sumps
  • Anything where water and a vacuum could help
Excavated_Hole.jpg

Excavated Hole With Metal Mesh

Posts_In_Place.jpg

Posts In Place

If you have a project that may benefit from our new Vacuum Excavator, call us today at 954-523-4848